A pitched roof has sloping surfaces at an angle of more than 20 degrees. On the other hand, a pitched roof may refer to two slopes of a roof meting at a central ridge. Generally, pitch refers to the vertical raise of a roof to the horizontal extension. A pitched roof is regarded as an effective and reliable way of making a building weather proof. Nowadays, pitched roofs are constructed using pre-fabricated frames known as trusses/rafters. The trussed rafters are designed and manufactured according to the precise loading requirements of a building. The loading requirements take into consideration the roof pitch, span and the weight of the slates and tiles to be used. Trussed roofs are not suitable for conversion since changing r removing any component would out rightly weaken the whole structure. This is unlike the traditional roofs where much of the roof’s load was centered on the purlins. There are several pitched roof styles including gabled, hipped and mansard pitch roofs.
Factors to consider for pitched roofing,
The greater the roof’s pitch, the more costly and difficult the roofing work is. Due to the added regulations and safety hazards, if the roof is too steep to access or stand on, then ensure that you hire a licensed contractor for the roofing job. This is mainly because such a contractor is bound to have the necessary equipment and specialized knowledge to provide workers with the necessary protection against falls. In order to ensure that federal guidelines are not violated and that the employees are well protected, it is vital that the contractor understands and uses fall arrest systems, guard rails, and safety nets that help prevent serious injuries.
The slope of pitched roofs makes them more difficult to work on during maintenance. Despite their good drainage, pitched roofs require regular inspection and frequent maintenance. On the other hand, failure to often inspect drains and gutters may leave them to be clogged and therefore, they will be damaged quicker.
The pitch you select plays a vital role in determining the roofing material for your roof. For example, shingle roofing is unfit for low-pitched roofs where moisture can easily accumulate. On the other hand, a steep-pitched roof is unsuitable for most roofing products that are single-ply. Asphalt shingles may be best suited for steep-pitched roofs.
Pitched roofs are a bit expensive as compared to flat roofs. However, this may not make up for the subsequent long-term benefits in terms of costs incurred during maintenance. Due to their reduced susceptibility to moisture, pitched roofs are best suited for wet climates.
Over the years, homeowners have taken the advantage of the extra space provided by pitched roofs to increase thee living space. Most commonly, the attic space is converted into extra bedrooms.
All these factors play important roles in determining the type of roof you settle for. Therefore, it is vital to know the facts surrounding the decision you make. Your choice should not only fit your budget but also all your needs and preferences if possible since style is bound to have an influence on the decision you make. It would help to have a professional contractor advise you on the type and style of roof you settle for
Filed under: Roofing Tagged: asphalt shingles, commercial roofing, pitched roof, pitched roof repair, pitched roof replacements, pitched roof structure, residential roofing, roof, roof material, roof repair, roof safety, roof structure, roof truss repair, Roofer, roofing, roofs, shingle replacement, shingle roof, shingles, sloped roof, steep roofs, structure
